WinTimerTester 1.1: A Free and Lightweight Utility to Test Your High Precision Event Timer
How to Use Win Timer Tester 1.1 to Optimize Your Windows Performance
Do you want to improve your Windows performance and gaming experience? If so, you might be interested in Win Timer Tester 1.1, a free and portable tool that lets you monitor and adjust your hardware timer resolution. In this article, we will explain what Win Timer Tester 1.1 is, how it works, and why you should use it.
win timer tester 1.1 download
What is Win Timer Tester 1.1?
Win Timer Tester 1.1 is a lightweight Windows program that displays the current values of your hardware timer. The hardware timer is a component that measures the passage of time and generates periodic interrupts for the processor. The timer resolution is the smallest unit of time that the timer can measure, and it affects the accuracy and responsiveness of your system.
By default, Windows uses a combination of different timers, such as the Time Stamp Counter (TSC), the Local Advanced Programmable Interrupt Controller (LAPIC), and the High Precision Event Timer (HPET). Depending on your hardware configuration, some of these timers may be faster or slower than others, and they may not be synchronized properly. This can result in suboptimal performance, especially for CPU-bound applications and games.
Win Timer Tester 1.1 allows you to see which timers are active on your system, and what their frequencies are. You can also start, stop, and reset the timer testing process. The program does not require installation, and it does not make any changes to your registry. You can simply download it from here and run it on any Windows computer.
How to Use Win Timer Tester 1.1?
To use Win Timer Tester 1.1, you need to follow these steps:
Make sure your motherboard chipset supports HPET. You can check this by opening Device Manager -> System Devices and looking for "High Precision Event Timer" in the list.
Enable HPET in your BIOS/UEFI settings. The location of this option may vary depending on your motherboard model, but it is usually found under Advanced -> Power Management or Chipset Configuration.
Reboot your computer and open Command Prompt as administrator.
Type bcdedit /set useplatformclock true and press Enter. This will force Windows to use HPET as the only timer source.
Reboot your computer again and launch Win Timer Tester 1.1.
Click on the Start button to begin the timer testing process. You will see four values in the Ratio section: TSC/LAPICs, LAPICs/HPET, TSC/HPET, and HPET/TSC.
If all these values are equal to or greater than 1.0000, it means that HPET is enabled and working properly on your system. If any of these values are less than 1.0000, it means that HPET is disabled or not functioning correctly.
You can also compare the QueryPerformanceFrequency value with the following table to see which timer(s) are active on your system:
Timer(s)PerformanceFrequency
TSC+LAPICsLow (slow timers + syncing)2.76MHz
LAPICsLow (slow timer - no syncing)3.5MHz
TSC+HPETMedium (slow and fast timer + syncing)3.8MHz
HPETHigh (fast timer - no syncing)14.3MHz
If you want to disable HPET for any reason, you can do so by typing bcdedit /deletevalue useplatformclock in Command Prompt and rebooting your computer.
Why Should You Use Win Timer Tester 1.1?
Using Win Timer Tester 1.1 can have several benefits for your Windows performance and gaming experience. Here are some of them:
You can improve the smoothness and responsiveness of your system by using a faster and more accurate timer.
You can avoid choppy gameplay and framerate drops caused by hardware acceleration on other monitors or applications.
You can fix some issues with multiple monitors with different refresh rates, such as the Windows GUI dropping to 30 fps.
You can test the security level of various websites by using a tool like HOIC that relies on HPET.
You can diagnose potential problems with your hardware or software by comparing your timer values with other users.
Of course, using Win Timer Tester 1.1 may not work for everyone, and it may have some drawbacks depending on your system configuration. For example, some users have reported increased CPU usage or power consumption after enabling HPET. Therefore, you should always test your system before and after using Win Timer Tester 1.1, and revert to the default settings if you encounter any issues.
Conclusion
In conclusion, Win Timer Tester 1.1 is a handy tool that lets you monitor and optimize your hardware timer resolution. It can help you improve your Windows performance and gaming experience by using a faster and more accurate timer source like HPET. However, you should always be careful when changing your system settings, and test your system thoroughly before and after using Win Timer Tester 1.1.
If you found this article helpful, please share it with your friends and leave a comment below. Also, if you have any questions or suggestions about Win Timer Tester 1.1 or anything related to Windows performance optimization, feel free to contact us anytime.
What are the Benefits of Using a Higher Timer Resolution?
Using a higher timer resolution can have several benefits for your Windows performance and gaming experience. Here are some of them:
A higher timer resolution can reduce input lag and improve responsiveness, especially for fast-paced games that require precise timing and reactions.
A higher timer resolution can increase the accuracy and stability of your system clock, which can affect various applications and functions that rely on time measurements.
A higher timer resolution can improve the performance of multimedia applications that use audio and video synchronization, such as video editing, streaming, and recording.
A higher timer resolution can enhance the compatibility and functionality of some legacy software and hardware that may not work well with the default timer settings.
However, using a higher timer resolution may also have some drawbacks depending on your system configuration. For example, some users have reported increased CPU usage or power consumption after enabling HPET. Therefore, you should always test your system before and after using Win Timer Tester 1.1, and revert to the default settings if you encounter any issues.
How to Optimize Your Timer Resolution for Gaming?
If you want to optimize your timer resolution for gaming, you can use Win Timer Tester 1.1 to enable HPET and set it as the only timer source. This will ensure that you have the fastest and most accurate timer available on your system. However, this may not be enough for some games that may require a higher timer resolution than the default HPET value of 14.3MHz.
In that case, you can use another tool called Timer Resolution to modify the timer resolution of your system on demand. This tool allows you to set the timer resolution to the maximum value of 0.5ms, which is equivalent to a frequency of 2000MHz. This can significantly improve the smoothness and responsiveness of your games, especially if they are CPU-bound or have high frame rates.
To use Timer Resolution, you need to follow these steps:
Download Timer Resolution from here and run it as administrator.
Click on the Maximum button to set the timer resolution to 0.5ms.
Launch your game and enjoy the improved performance.
When you are done playing, click on the Default button to restore the timer resolution to the original value.
Please note that using Timer Resolution may increase your CPU usage or power consumption, so you should only use it when necessary. Also, some games may not benefit from a higher timer resolution, or may even perform worse. Therefore, you should always test your games before and after using Timer Resolution, and adjust the settings accordingly.
What are the Alternatives to Win Timer Tester 1.1?
Win Timer Tester 1.1 is not the only tool that can help you monitor and optimize your hardware timer resolution. There are some other alternatives that you can try, depending on your needs and preferences. Here are some of them:
TimerTool: This is a simple and lightweight tool that allows you to change the timer resolution of your system on demand. You can choose from three preset values: 0.5ms, 1ms, and 15.6ms. You can also enter a custom value between 0.5ms and 25ms. You can download TimerTool from here.
ISLC: This stands for Intelligent Standby List Cleaner, and it is a tool that can improve your system performance by clearing the standby memory list when it is full or exceeds a certain threshold. It can also set the timer resolution to 0.5ms automatically when you launch a game or application, and restore it to the default value when you close it. You can download ISLC from here.
Process Lasso: This is a powerful and comprehensive tool that can optimize your system performance by managing the processes and services running on your computer. It can also set the timer resolution to the optimal value for each process, depending on its priority and CPU affinity. You can download Process Lasso from here.
Please note that using these tools may have some risks or side effects, such as increased CPU usage or power consumption, compatibility issues, or system instability. Therefore, you should always backup your system before using them, and test them carefully before and after using them.
How to Troubleshoot Win Timer Tester 1.1?
If you encounter any problems or errors while using Win Timer Tester 1.1, you can try some of these troubleshooting steps:
Make sure you have downloaded the latest version of Win Timer Tester 1.1 from here, and that it is not corrupted or infected by malware.
Make sure you have enabled HPET in your BIOS/UEFI settings, and that your motherboard chipset supports it.
Make sure you have run Win Timer Tester 1.1 as administrator, and that it has the necessary permissions to access your hardware timer.
Make sure you have entered the correct command in Command Prompt to enable or disable HPET as the only timer source.
Make sure you have rebooted your computer after changing any settings related to your hardware timer.
Make sure you have closed any other applications or processes that may interfere with your hardware timer or Win Timer Tester 1.1.
If none of these steps work, you can contact the developer of Win Timer Tester 1.1 through their website or email, and report your issue with as much detail as possible.
If you have any questions or suggestions about Win Timer Tester 1.1 or anything related to Windows performance optimization, feel free to contact us anytime.
Conclusion
In conclusion, Win Timer Tester 1.1 is a handy tool that lets you monitor and optimize your hardware timer resolution. It can help you improve your Windows performance and gaming experience by using a faster and more accurate timer source like HPET. However, you should always be careful when changing your system settings, and test your system thoroughly before and after using Win Timer Tester 1.1.
If you found this article helpful, please share it with your friends and leave a comment below. Also, if you have any questions or suggestions about Win Timer Tester 1.1 or anything related to Windows performance optimization, feel free to contact us anytime. 4e3182286b